Your eyes are one of the most precious things you have. You only have one set, and they are very easy to damage – especially on the job. Each day, about 2,000 workers have job-related eye injuries that require medical attention. About a third of these injuries are treated in hospital emergency rooms. More than 100 of these result in at least a day of missed work.
Most of these injuries result from small particles or objects striking of abrading the eye. For example, cement chips, metal slivers, wood chips, dust, wind blown debris, or a fall that results in damage to the eye. Fortunately, most of these accidents are also preventable.
Using Engineering Controls and Protective Gear
If you’ve already decided to visit Lenstore for contact lenses, then you’re going to need protective eyewear on the job. Most people overlook the simple act of putting on safety glasses, but it could save your eyesight. Get lenses that wrap fully around your eyes, preventing dust and debris from entering any part of them.
Other safety gear include face shields, goggles, and even full face respirators. Regardless of what you wear, make sure that you select the appropriate Z87 eye protection for the hazard you expect to be exposed to. Make sure the eyewear is in good condition. Check it before every use. Finally, make sure the eyewear fits properly, that the temples, bridge, and lens are in good order and will stay fixed in place on your face.
Create a Safe Work Environment
Creating a safe work environment is very important. Minimise hazards from falling or unstable debris by checking work areas thoroughly before you start working. All tools should be checked prior to use to ensure they are working properly. All co-workers should know how to use tools properly. Keep bystanders out of any hazardous area you’re working in unless they are working with you.
Evaluate Safety Standards
Evaluating safety standards doesn’t have to be complicated. Basically, what you have to do is identify the primary hazard and then identify hazards posed by nearby workers, large machinery, and falling or shifting debris. This will allow you to put proper protocols or safety procedures into place to minimise health risks.
Use Good Work Practises
Before you take off your protective eyewear, brush, shake, and vacuum all dust and debris off of yourself. Just because you’re done working doesn’t mean the danger is gone. Sometimes, the biggest threat comes when you’re removing your eyewear. Metal filings, for example, can fall out of your hair or all the top of your safety glasses and into your eye if you don’t clear the area away thoroughly.
Don’t rub your eyes with dirty hands or clothing, and always clean eyewear before you use it.
Prepare With First-Aide
It’s inevitable. Someone is eventually going to get hurt. That’s just statistics. Prepare, and understand how to use, a first-aide kit. Have sterile eye wash available as well as clean, lint-free cloths.
Roger Anderson is adament that his employees take care of themselves on the job. He enjoys blogging about workplace health and safety.